SDC’s EP17624 series explosion proof electromagnetic locks

Product Description

SDC’s EP17624 series explosion proof electromagnetic locks
are specifically designed for applications where flammable vapors
are cause for concern, like clean room, chemical plant, or refinery
environments by eliminating the sparks or arc in the magnetic lock.
UL listed for use in hazardous locations class 1, division 2.
This unit is intended to be used in the following atmospheres:
acetone, ammonium hydroxide, ATSM fuel C, benzene, methylethylketone, diethyl-ether, 2-nitropropane, ethyl-acetate, furfural,
normal hexane, methyl alcohol.
Operating temperature for the magnetic lock will not exceed 185°
F (85° C). Maximum ambient temperature is not to exceed 104° F
(40° C). For supply connections, use a suitable wire with a minimum
insulation temperature rating of 167° F (75° C).
This unit must be connected to a NEC (National Electric Code),
NFPA 70) class 2 supply circuit rated for 24 VDC with a minimum
current output of 500 mA and output power of 12 watts. UL listed
SDC 600 series power controller is recommended.